Level IIIA Handgun Plate

DFNDR Armor Level IIIA handgun plate is lightweight at 0.96 lbs. per medium size. This armor system has been independently tested to meet NIJ 0101.06 Protocol. Tested at muzzle velocity to stop multiple rounds of the .357 SIG and the .44 Mag SJHP. DFNDR Armor is engineered with the highest grade of ballistic materials; an ultra-high molecular weight polyethylene (UHMWPE) fiber bound with a resin matrix, to make it a rigid hard stand-alone armor system. This plate is tested at muzzle velocity, mitigates spall and deflection.

 

 Self-Protection Ammunition / Pistol Calibers:

  • .22LR

  • 9mm

  • 40 S&W

  • 45 ACP

  • 10mm

  • .357 Magnum

  • .44 Magnum

 

Multi-Curve Design

SAPI -or- Shooters Cut
Weight: 0.96 lbs.
Thickness: 0.60 inches
Size: 9.5×12.5 (MIL Size)

Level III Rifle Plate

The DFNDR Level III Rifle Plate is lightweight at only 2.9 lbs. per plate (size 10 x 12) and has been tested to NIJ 0101.04 Protocol. This armor system is rated to defeat multiple rounds of 7.62x51mm Steel Jacket NATO M80, 5.56x45mm M193 and 7.62x39mm Ball ammunition.

DFNDR Armor is engineered with the highest grade of advanced ballistic materials; an ultra-high molecular weight polyethylene (UHMWPE) fiber bound with a resin matrix, to make it a rigid hard stand-alone armor system. This armor system is tested at muzzle velocities listed below, mitigates spall and deflection. The level III plate is also equipped with state of the art trauma reduction technology to reduce the energy of an impact to the body.

 

 

 

 

 

 

LEVEL III THREAT PROFILE

STAND-ALONE ARMOR SYSTEM

The ammunition listed in this threat profile is defeated by our level III rifle armor at muzzle velocities. In addition, the back face deformation measured for each round on impact, meets and exceeds the NIJ 0101.04 Protocol

Multi-Curve Design

SAPI -or- Shooters Cut
Weight: 2.9 lbs. (+/- 5%)
Thickness: 1.0 inches (+/- 5%)
Size: 9.5×12.5 (MIL Size) (+/- 5%)

Level III+ Rifle Plate - Special Threat Tested

This hard armor plate is a designed with multi curvatures (multi-curve) to provide an ergonomic and comfortable fitting armor system against your body. This armor system is equipped with state of the art trauma reduction technology to dramatically minimize the energy of an impact.

The DFNDR Level III+ Rifle Plate is tested at muzzle velocities which are listed in the below ‘threat profile’ table and describes the rated ammunition this armor system will defeat. DFNDR Armor is engineered with the highest grade of ballistic materials; an ultra-high molecular weight polyethylene (UHMWPE) fiber bound with a resin matrix, to make it a rigid hard stand-alone armor system. This armor system is tested at muzzle velocities, mitigates spall and deflection.

LEVEL III+ THREAT PROFILE

STAND-ALONE ARMOR SYSTEM

The ammunition listed in this threat profile is defeated by our level III+ rifle armor at muzzle velocities. This plate is NIJ 0101.06 Certified and meets/exceeds the standards for back face deformation (trauma to the body).

Multi-Curve Design

SAPI -or- Shooters Cut
Weight: 2.5 lbs. (+/- 5%)
Thickness: 1.1 inches (+/- 5%)
Size: 9.5×12.5 (MIL Size) (+/- 5%)

For More Information on Level III++ and Level IV Armor Plates
Please Click Here

M2 Series

The DKX M2 Series ballistic plates are intended for use as an ultra-lightweight hard plate alternative to traditional level IIIA soft armor. This series also features an inherently handgun and knife resistant construction, offering true multi-threat capabilities unmatched by soft armor. Additionally, the M2 Series utilizes a multi-curve geometry, which provides greater comfort and fit to a wide variety of users. Available sizes range from 5”x6” to 11”x14”, making this series an ideal choice for use as a trauma plate or side armor.

PROTECTION TYPE/THREAT LEVEL: Special (Handgun/Knife)

CONFIGURATION: Stand-Alone

CONSTRUCTION: Polyethylene

PROTECTIVE COVERS AVAILABLE: Polyurea

HIT RATING: Multi

MODEL #: D2000

TESTING CERTIFICATION/STANDARD: Special Threat Tested*

SPECIAL THREATS:

  • 5.7 x 28mm SS197SR

  • 7.62 x 25mm 85gr FMJ

  • 9mm 127gr SXT

  • 9mm 124gr HST

  • 9mm 115gr FMJ

  • 9mm 96gr

  • SPEER .44 MAG 240gr SJHP

  • SPEER .357 SIG 125gr FMJ FN

  • NIJ P1 single-edged blade level 1 E1 & E2

  • .40 S&W 60gr Ultra

  • .40 S&W 60gr Civil

M3 Series

The DKX M3 Series ballistic plates are NIJ 0101.06 level III certified stand-alone. The M3 also stops special, non-armor piercing threats, such as the Winchester Ranger and 7.62x39 MSC. The positive buoyancy of the M3 plates provides users in waterborne or maritime environments added support and flotation, while a rigid polycarbonate backing gives superior blunt force trauma protection. Each DKX M3 Series plate comes equipped with Radio Frequency Embedded Verification (RFEV) tracking for inventory management along with an industry first 7 year warranty. Applies only to certified plate sizes.

PROTECTION TYPE/THREAT LEVEL: NIJ III Plus

CONFIGURATION: Stand-Alone

CONSTRUCTION: Polyethylene

PROTECTIVE COVERS AVAILABLE: Polyurea

HIT RATING: Multi

MODEL #: DKX MAX III (NIJ Compliance Product List)

TESTING CERTIFICATION/STANDARD:

  • NIJ 0101.061

  • Special Threat Tested*

SPECIAL THREATS:

  • .223 Rem 60gr Partition

  • 7.62mm x 39mm 123gr Mild Steel Core

  • 7.62mm x 51mm 147gr M80 FMJ

M7 Series

The DKX M7 Series ballistic plates add advanced special threat protection to an already impressive NIJ 0101.06 level III certified package. Through the use of lightweight polyethylene and a proprietary ceramic strikeface, the M7 Series is capable of reliably stopping both the M855 and 7.62x39 MSC. Comfortable and lightweight, the M7 is the clear choice for those requiring NIJ certification, advanced threat protection, and a competitive price.

PROTECTION TYPE/THREAT LEVEL: NIJ III Plus

CONFIGURATION: Stand-Alone

CONSTRUCTION: Ceramic/Polyethylene

PROTECTIVE COVERS AVAILABLE: Polyurea

HIT RATING: Multi

MODEL #: D1557 (NIJ Compliance Product List)

TESTING CERTIFICATION/STANDARD:

  • NIJ 0101.061

  • Special Threat Tested*

SPECIAL THREATS:

  • 5.56mm x 45mm 62gr Ball (M855)

  • 7.62mm x 39mm 123gr PS Ball (Mild Steel Core)

  • 7.62mm x 51mm 147gr M80 FMJ

For More Information on 
M5 Series, M12 Series,
M20 Series or M21 Series
 Armor Plates
Please Click Here

INNOVATION for the TACTICAL ATHLETE

© 2017 Ergo-Operations Ltd. | Privacy Policy | Terms Of Use